Flexible 30×32 Dot Matrix LED Display
WS2812B Matrix LED Display
Features
1-WS2812B/SK6812 3 Pin LED installed .30*32 CMPixel.
2-Only Black PCB Color,flexible PCB that can be gently bent and curred afound surface.
3-DC5V inputted, donnot exceed DC6V or short circuit,nopolarity prodect.
4-3Pin JST sm connector soldered 2 extra wire for powering
5-Nowaterproof IP20
6-Controller:SD controller,micro controller such as Arduino
7- being able to individually control each LED
Share This Product
Product Details
Features
led dot matrix display 30×32 indoor full color led display full color led module
- Control IC SK6812/ws2812b inserted in 5050 RGB LED diode , supporting numerous color-change effects .
- Black PCB optional .
- It comes in one piece separated by a 3Pin JST SM connector and extra Power /Ground Wires .
- Flexible PCB material . This matrix has a thick flexible PCB backing that can be gently bent and curved around surfaces
- This matrix with 256 leds, you could use over 15A of current if you turn on all the LEDs on to white (which we really do not recommend because we don’t think the flex PCB can handle that much current in a long time ). Try to keep the current draw at under 5A.
Applications
- City skyline lighting villas advertising wall signs Christmas ( , , decorative landscape)
- Irregular design of body decoration (shopping malls, hotels, nightclubs, polygonal wall KTV
- establishments ceiling cavity design)
- Public lighting lighting (schools, libraries, hospitals, airports, subway stations, railway stations)
- Furniture dark groove trim (door, bar, wine cabinet, wardrobe, TV cabinets, etc.)
- Automotive beauty (body, underbody, wheelbarrow balanced car, etc.)
Notes
- Please read the specifications and precautions carefully before installation
- Please do not use nails or sharp instruments to intall led strip on the object, use double-sided tape or glue or wall mounted on plywood
- Fixed led strip, you can not use acidic glue, it is recommended to use a neutral glue.
- This product is a constant voltage DC5V, make sure Power is right before installation, after installation, check the wiring is
- correct or not , so that avoid the product been burned
- This product is recommended use in parallel. when the length is more than five meters, the tail so be power to ensure the brightness is enough or uneven
Contact Us
Follow Us
