Posts

sk6812 side smd4020 rgb led chip

Sk6812 Side Smd 4020 Full Color Rgb Led Chip

WITOP Built-in driver IC chip, point control LED lamp beads, Full Color SK6812 SIDE 4020 RGB SMD LED

SK6812 – Side-5v- addressable- led -chip -specification

1, Product Overview :

SK6812 SIDE is a smart LED control circuit and light emitting circuit in one controlled LED source, which has the shape of a 4020 LED chip. Each lighting element is a pixel, and the intensities of the pixels are contained within the intelligent digital interface input. The output is driven by patented PWM technology, which effectively guarantees high consistency of the color of the pixels. The control circuit consists of a signal shaping amplification circuit, a built-in constant current circuit, and a high precision RC oscillator.

The data protocol being used is unipolar NRZ communication mode. The 24-bit data is transmitted from the controller to DIN of the first element, and if it is accepted it is extracted pixel to pixel. After an internal data latch, the remaining data is passed through the internal amplification circuit and sent out on the DO port to the remaining pixels. The pixel is reset after the end of DIN. Using automatic shaping forwarding technology makes the number of cascaded pixels without signal transmission only limited by signal transmission speed.

The LED has a low driving voltage (which allows for environmental protection and energy saving), high brightness, scattering angle, good consistency, low power, and long life. The control circuit is integrated in the LED above.

2, Parameter:
Product name: 4PIN SK6812  SIDE SMD4020 RGB SIDE LED
Input voltage: DC5V
Power:0.2W/PCS
Signal: SK6812 chip
Current:60mAH
View angle:120 degree
Life span:no less than 50000hrs
LUMINOUS:20~22lm 22~24lm
Package include:1000pcs SK6812 SIDE LEDs(1000pcs/roll)(White)

4, Description:

A Top SMD internal integrated high quality external control line serial cascade constant current IC;

B control circuit and the RGB chip in SMD 5050 components, to form a complete control of pixel, color mixing uniformity and consistency;

C built-in data shaping circuit, a pixel signal is received after wave shaping and output waveform distortion will not guarantee a line;

D The built-in power on reset and reset circuit, the power does not work; gray level adjusting circuit (256 level gray scale adjustable);

E red drive special treatment, color balance;

F line data transmission;

G plastic forward strengthening technology, the transmission distance between two points over 10M;

H Using a typical data transmission frequency of 800 Kbps, when the refresh rate of 30 frames per sec

5,  Pin configuration:

6, The data transmission time (TH+TL=1.25µs±600ns):

T0H

0 code, high level time

0.3µs

±0.15µs

T0L

0 code, low level time

0.9µs

±0.15µs

T1H

1 code, high level time

0.6µs

±0.15µs

T1L

1 code, low level time

0.6µs

±0.15µs
Trst

Reset code,low level time

80µs

7,Main Application Field:

1,To create the flexible LED dispaly, LED curtain.

2, Indoor & Outdoor decoration, fashion decoration.

3, Guardrail tube series, point light display series, flexible/rigid strips series, module series applications,LED point light, LED pixel screen, LED shaped screen, a variety of electronic products, electrical equipment etc..
Any question,please contact me by email:Alvin@witop-tech.com