The K – 8000C LED controller is a device used in lighting control systems. Because it supports various point, line, and area light sources and can handle multiple regular and special – shaped situations, it is suitable for commercial lighting scenarios.

• 32 to 65536 grade gray control, software Gamma correction processing.
• Supports various point, line and area light sources, supports various rules, and special-shaped processing.
• The controller has eight ports output, each port can load the maximum of 512/1024 pixels (the maximum 512 pixels of
  the DMX luminaire is exemplified by three channels).
• The playback content is stored in the SD card, which can store up to 32 effect files. The SD card capacity supports
  128MB-32GB.
• The controller can be used in a single unit or in multiple cascades. The cascade uses photoelectric isolation:anti-interference and better stability. The cascade distance between the two units can reach 150 meters, and 0.5 squaremeters of pure copper power cord is needed.
• The controller with the loaded chip can lock the loaded IC in the software or not. By adjusting the controller’s chip
  button to select the loaded IC, this scheme is more flexible and convenient.
• The IC controller for DMX luminaires comes with a write address function; in addition, with our 2016 LedEdit-K V3.26
  or higher software, one-click address function can be set
• Supports on-board luminaires with 4 channel (RGBW) pixels or split into single channel point pixels.
• Enhanced TTL and 485 differential (DMX) signal output.
• The controller comes with 22 test effects; it comes with DMX512 channel test function.